รายละเอียด
Specifications
BLX4R Single Channel Half-Rack Receiver
Output | 1x XLR Output
1x 1/4″ (6.35 mm) Output |
Output Impedance | XLR: 200 ohms
1/4″: 50 ohms |
Audio Output Level | XLR Connector: -20.5 dBV into 100 kOhms Load (Reference +/-33 kHz with 1 kHz Tone)
1/4″: -13 dBV into 100 kOhms Load (Reference +/-33 kHz with 1 kHz Tone) |
RF Sensitivity | -105 dBm for 12 dB SINAD, Typical |
Image Rejection | >50 dB, Typical |
Housing | Molded ABS, Steel |
Power Requirement | 12 to 15 VDC @ 260 mA, Supplied by External Power Supply (Tip Positive) |
Dimensions (H x W x D) | 2.0 x 7.8 x 6.4″ (50 x 198 x 163 mm) |
Weight | 2.2 lb (998 g) |
BLX4 เครื่องรับ Bodypack แบบ 1 แชนแนล
Output | 1x XLR Output
1x 1/4″ (6.35 mm) Output |
Output Impedance | XLR: 200 ohms
1/4″: 50 ohms |
Audio Output Level | XLR Connector: -27 dBV into 100 kOhms Load (Reference +/-33 kHz with 1 kHz Tone)
1/4″: -13 dBV into 100 kOhms Load (Reference +/-33 kHz with 1 kHz Tone) |
RF Sensitivity | -105 dBm for 12 dB SINAD, Typical |
Image Rejection | >50 dB, Typical |
Housing | Molded ABS |
Power Requirement | 12 to 15 V DC @ 160 mA, Supplied by External Power Supply (Tip Positive) |
Dimensions (H x W x D) | 1.5 x 7.4 x 4.1″ (40 x 188 x 103 mm) |
Weight | 8.5 oz (241 g) |
PGA31 ไมโครโฟนคาดศรีษะ 1 ตัว
Type | Electret condenser |
Frequency Response | 60 Hz to 20 kHz |
Polar Pattern | Cardioid |
Output Impedance | 600 Ω @ 1 kHz, typical |
Audio Output Level | -50 dBV/Pa |
Signal to Noise Ratio | 66 dB @ 1 kHz |
Maximum SPL | 145 dB, @ 1 kHz (1,000 Ω load) |
Dynamic Range | 117 dB, @ 1 kHz (1,000 Ω load) |
Output Noise | 28 dB, typical, A-weighted |
Power Requirements | +5 V DC (nominal), 10 V maximum (DC bias) |
Polarity | Positive pressure on diaphragm produces positive voltage on pin 3 with respect to pin 1 |
Cable | 50″ (1.3 m)) |
Connector | TA4F |
Weight | 1.59 oz (45 g) |